Dayton Maker Faire 2017

2017 Dayton Mini Maker Faire Recap

Another Dayton Maker Faire is now in the books. Like last year, I was lucky enough to have a faire (GET IT??!?!!) amount of involvement. This event is great, and to be able to support Dayton and see the everyone enjoying their time is really rewarding.

MCM Electronics chose to put on a learn-to-code booth using the BBC Micro:Bit, which was very well received. I created two projects that attendees could code with the micro bit, using Javascript Blocks; a simple name scroller as well as a pedometer. I created instruction sheets, a repeating presentation that displayed above the booth, as well as signage for outside the booth. MCM was selling Learn to Solder kits, Raspberry Pi kits, as well as Micro:Bit boards and kits. The booth was well attended throughout the weekend, and feedback suggested people were very happy to have a hands-on activity to complete. Some used the instructions to get up and running, while others knew exactly what they were doing.

Micro:Bit Banners at the Dayton Maker Faire

Banners made for a welcoming entrance to the MCM booth.

 

Micro:Bit Instructions

Complete instructions were found at each station to walk users through two different projects.

Micro:Bit Activities at the Dayton Maker Faire

In the event there were questions, MCM had a several staff members on hand to help.

Photo Aug 05, 7 33 34 PM

Photo Aug 05, 7 33 27 PM

The Learn to Solder signage and banners I made last year was used again this year. Glad to see they’re still holding up well!

Learn to Solder Sign at the Dayton Maker Faire

Last, but not least, Michael Castor and I defended our Boneyard Build Off championship from last year, joined by Chas Clark. This year, we named the team the “Constant Variables”. The goal was to build a water balloon launcher that would be judged on distance, looks, rate of fire, and accuracy. This event grew quite a bit over it’s maiden year, with five teams instead of two, and running over the course of two days instead of one. Additionally, instead of being supplied with “junk”, the teams were tasked with collecting junk from Mendelson’s Liquidation Outlet the weekend before. For nearly five hours, everyone combed through the first and third floors, looking for anything that could be used to help build a winning balloon launcher.

Our team meshed wonderfully, coming up with a plan and building on it throughout day one. Our concept was a cannon-shaped device mixed with a stationary rower, enabling the shooter to slide back on a rail as well as pull with his arms.The base was a large cable spool, held in place by springs and a steel axle. The frame was made from six 2x4s and some scrap OSB. The sliding seat was mounted on a thick sheet of delrin (the things you find at Mendelson’s!) and rode on extruded aluminum. A set of bike pedals helped the shooter apply backwards force, and two large PVC tubes held spare balloons. Here is the full parts list:

Mendelson’s

  • Large Cable Spool
  • Springs to center spool
  • Steel axle
  • PVC magazines to store balloons
  • Lawn mower seat
  • Delrin on which the seat slid
  • Rear castor
  • Misc hardware

Community Scrap Pile at the Event

  • Bike pedals

Team Supplied

  • Six 2x4s
  • Surgical Tubing
  • Extruded Rail
  • Flags, Paint and Stickers
  • Lots of ingenuity

By day two, we were painting and fine tuning our launcher.

All five teams finished their builds and had a working launcher in some capacity when the competition started.

Boneyard Buildoff at the Dayton Maker Faire

Here are a few detail shots of our launcher:

Boneyard Buildoff Balloon Launcher Magazines

The “bomb” detail was all Chas’ idea from the start. Adding some vinyl decals, magic marker and the bolt heads took it to the next level!

Boneyard Buildoff Balloon Launcher Seat and Slide

Stirrups, combined with some strategically placed surgical tubing helped bring the shooter back into position.

Boneyard Buildoff Balloon Launcher Bomb Detail

So angry, the bombs were!

Boneyard Buildoff Balloon Launcher

Boneyard Buildoff Balloon Launcher

Boneyard Buildoff Balloon Launcher View from Behind

Boneyard Buildoff Balloon Launcher Seat Assembly

In the end, our launcher outperformed the competition, launching nearly twice as far, more frequently, more accurately, and looked the part. Of a possible 20 points, we scored 18, giving our team the win for the second consecutive year. We look forward to trying for a hat-trick next year!

Boneyard Buildoff Scores

Final scores for all the teams.

Boneyard Buildoff Awards

The awards Josh made were cool. Laser cut layers with some rustic weathering.

Boneyard Buildoff Award Ceremony

Michael being knighted…or awarded…or something.